Hempcrete is a Hemp lime composite construction material that can be used for walls, insulation of roofs and floors and as part of timber-framed buildings. It provides very good thermal and acoustic performance, and offers a genuinely zero-carbon contribution to sustainable construction. Hemp masonry is breathable and is able to absorb and emit moisture, leading to much healthier buildings.
Tech-Pro is a breathable multi layered insulation material for use in roofs.Tech pro is made from a unique combination of flax, cotton, polyester wadding and micro perforated metallised films, protected by a highly permeable reinforced reflective membrane.
The product can be positioned:
• LABSSRD36A - over rafter andbelow battens, and
• LABSSRD36B - under softwood sarking boards.
External wall insulation system 1, a mechanically fixed (with supplementary adhesive when required) system, consisting of expanded polystyrene (EPS), mineral wool (MW), polyisocyanurate (PIR) or phenolic (PHS) insulation boards, glassfibre reinforcing mesh and render finishes, suitable for use on new or existing domestic buildings.System 1 consists of: Insulation Boards, Enewall Adhesive Coat, Enewall Reinforcing Glass Mesh, Enewall Mechanical Fixings (as per required fixing pattern, Enewall Exposed Aggregate Render, Enewall Smooth Band Render, Enewall Dash Aggregate.
This is an assessment of LRC Partitioning System, a lightweight interlocking sandwich panel with a fibre cement board face and a core of lightweight Portland cement, expanded polystyrene and polymeric plasticizers. The panels are factory made in standard sizes of 3000mm x 610mm with joints taped and filled. Bespoke sizes are available to order.The wall panels are mechanically fixed to concrete floors with GI channels or angles to hold in position.
This is an assessment of TuffStuff GRP Flat Roof System, a wet laid single ply GRP laminate made up of two layers of base coat resin sandwiching a layer glass fibre reinforcing mat. It is applied to a good quality new OSB3 or WBP plywood deck (18/25mm). Profiled GRP edge trims are applied to the roof edges and abutments and the roof is finished with a coat of coloured top coat resin.A 25-year product warranty is offered to TuffStuff stockists and contractors, subject to terms and conditions.
Individual and group training sessions are available to installers.
The Flexitec 2020 System by Res-Tec is a flexible, single resin GRP system with full overlay capabilities. Combining the best elements of fibreglass with the versatility of overlay systems, no other flat roof solution performs at this level across so many applications.
