West Dunbartonshire Council

External wall insulation system 1, a mechanically fixed (with supplementary adhesive when required) system, consisting of expanded polystyrene (EPS), mineral wool (MW), polyisocyanurate (PIR) or phenolic (PHS) insulation boards, glassfibre reinforcing mesh and render finishes, suitable for use on new or existing domestic buildings.System 1 consists of: Insulation Boards, Enewall Adhesive Coat, Enewall Reinforcing Glass Mesh, Enewall Mechanical Fixings (as per required fixing pattern, Enewall Exposed Aggregate Render, Enewall Smooth Band Render, Enewall Dash Aggregate.

The Epsitec EWI System is an external wall insulation system mechanically fixed using cavity spacer rails to a sheathed timber frame substrate.  The system consists of either EPS, EpsiTherm (enhanced EPS) or Phenolic insulation with a reinforced basecoat and silicone textured finish.  It is suitable for use on the external walls of new and existing domestic and non-domestic buildings.Substrates applicable: Steel frame substrates sheathed in a suitable sheathing board or existing cladding.

RD680BAlumasc exterior wall cladding system consist of back-ventilated external cladding, mechanically fixed through timber battens to a timber frame substrate. The system includes a carrier board on which a render base coat is bonded. Different render finishes may then be applied; this assessment is for the Acrylic Finish.
All products are manufactured and controlled under a Quality Management system ( ISO 9001:2008 ).

RD680A Alumasc exterior wall cladding system consist of back-ventilated external cladding, mechanically fixed through timber battens to a timber frame substrate. The system includes a carrier board on which a render base coat is bonded. Different render finishes may then be applied; this assessment is for the Silicone Finish.
All products are manufactured and controlled under a Quality Management system ( ISO 9001:2008 ).

RD680CThe Alumasc Ventilated System (AVS) consists of back-ventilated external cladding which is mechanically fixed to either treated timber battens or galvanised rails which is designed for use in conjunction with timber framed substrates. The system includes a carrier board on which a render base coat is bonded. Different render finishes may then be applied; this assessment is for the Dashing Render. The product is manufactured and controlled under a Quality Management system (ISO 9001:2008).

Warmworks currently has 8 Registered Details registered under their banner with 6 approvals and 2 pending as follows:
APPROVED:
LABSSRD23A WARMWORKS EPSICON 3 EXTERNAL WALL INSULATION SYSTEMS
LABSSRD23B WARMWORKS ENEWALL LTD EXTERNAL WALL INSULATION SYSTEM 1
LABSSRD23EMW WARMWORKS SPS ENVIROWALL WALL SYSTEM 1 EWI – MINERAL FIBRE INSULATION
LABSSRD23EPH WARMWORKS SPS ENVIROWALL WALL SYSTEM 1 EWI – PHENOLIC INSULATION
LABSSRD23FEPS WARMWORKS - SPS ENVIROWALL WALL SYSTEM 1 EWI - WHITE OR ENHANCED (GREY) EPS INSULATION